piping accessories

• PTFE Expansion Joints
• Isolates Vibration & Shock
• Compensates for Misalignment
• Available in 1/2" - 42"
• Available in 2-12 Convolutions
• Pure 100% Virgin PTFE Resin
• Uniform Wall Thickness
• T-Band™ Protection from Over Compression
• LimitLinks™ Protection From Over Expansion

• Advanced Proprietary Fiber Reinforced Composite Construction
• Tensile & Compressive Strengths Rival Steel
• Outstanding Impact Resistance
• Virtually Indestructible
• Drilled to CL150, PN10/16, JIS
• ANSI B16.5 Dimensions
• Temperature Range -60 °F to 300 °F

• Molded PTFE Bearing Material
• Molded Over Both Sides and Through a Sheet of Perforated Stainless Steel
• Combines Sliding Properties of TFE With Strength and Rigidity of Steel
• Simple, Easy Installation
• No Adhesives or Bonding Agents
• Low Friction-High Load
• Almost Indestructible
• Positive Fastening
• No Lubrication
• Economical

• Manufactured Through a Proprietary Process
• FDA Approved Pure Virgin PTFE Resin Compression Molded Around & Through 304 Stainless Steel Perforated Metal Insert
• Spark Tested to 5,000 Volts to Check For Pinholes
• PTFE Resin 100% Encapsulates The Insert, Isolating It From Any Fluid Contact
• Molded to Size 1/2" to 24"
• 150# and 300# ANSI Dimensions With Nominal Thickness of 1/8" or 3/32"
• Temperature Ranges - Cryogenic to 400 °F

• Manufactured Through a Proprietary Process
• Static-Dissipating PTFE Resin Compression Molded Around & Through 304 Stainless Steel Perforated Metal Insert
• Spark Tested to 5,000 Volts to Check For Pinholes
• Conductivity/Static Dissipating Properties of Less Than or Equal to 10⁶ohm-cm
• Molded to Size 1" to 6"
• 150# ANSI Dimensions With Nominal Thickness of 1/8"
• Temperature Ranges - Cryogenic to 400 °F

• Manufactured Through a Proprietary Process
• FDA Approved Pure Virgin PTFE Resin Compression Molded Around & Through 304 Stainless Steel Perforated Metal Insert
• Handles Extends 2" Above Flange and Has Pre-Drilled Hole For Tagging/Hanging
• PTFE Resin 100% Encapsulates The Insert, Isolating It From Any Fluid Contact
• Molded to Size 1" to 8"
• 150# ANSI Dimensions With Nominal Thickness of 1/8"
• Rated to 150 PSI Temp Ranges - Cryogenic to 400 °F

• Ideal For Fluid Motion, Flow & Color Inspection
• Rugged Ductile Iron Housing
• Thick Borosilicate Glass For Impact Resistance
• PFA Lining

Resistant To:

• All Acids & Solvents, Organic & Inorganic Chlorides & Sulfates
• All Bleach Solutions, Phenols, Caustics & Peroxides
• Temperature Range -20 °F to 400 °F

Secure your piping system with our safe and easy to use pipe hangers.

• Strong and Lightweight
• Easy to Mount
• Simplifies Maintenance
• Quick Mounting and Unmounting of Pipes