PTFE lined alloy steel pipe - Better Chemical Resistance

• Super Heavy Duty PTFE Liners
• Seamless Steel Housing
• Forged Steel Flanges
• Standard Two-Part High Solids, High Build, Polyamide, Epoxy Primer
• Fully Vacuum rated to 450 °F
• Sizes Range 1" to 12"
• Pressures to 285 PSI
• Temperature Range -20 °F to 450 °F

• Super Heavy Duty PTFE Liners
• Seamless Stainless Steel Housings
• Forged Stainless Steel Flanges
• Fully Vacuum rated to 450 °F
• Sizes Range 1" to 12"
• Pressures to 275 PSI
• Temperature Range -20 °F to 450 °F

• Manufactured Through a Proprietary Process
• FDA Approved Pure Virgin PTFE Resin Compression Molded Around & Through 304 Stainless Steel Perforated Metal Insert
• Spark Tested to 5,000 Volts to Check For Pinholes
• PTFE Resin 100% Encapsulates The Insert, Isolating It From Any Fluid Contact
• Molded to Size 1/2" to 24"
• 150# and 300# ANSI Dimensions With Nominal Thickness of 1/8" or 3/32"
• Temperature Ranges - Cryogenic to 400 °F

• Efficient Air Cylinder Design
• Longer Diaphragm Life & Reduced Air Consumption
• Rugged Construction
• Ductile Iron Bolted Casings
• Handles Corrosive & Abrasive Applications With Ease
• Wide Range of Elastomer Linings Available For More Extreme Applications
• Minimal Service & Maintenance
• Externally Accessible Check Valve Assemblies
• Superior Solids-Handling Design

• Fabricated from Heavy-Walled Virgin PTFE Tubes
• All Flanges are Threaded Onto Tube & Pinned In Place
• Tough Enough for Applications like Agitated Reactors

Durable Design:

• ASTM F423 Steam-Cold Water Cycle Test
• 10,000 Volt Elecrostatic Spark Test
• Virtually Eliminates Possibility of Heat-Seal Failure

• Ethylarmor^® High Temperature Corrosion Resistance
• Encapsulated Schedule 80 Carbon Steel Pipe
• Tough Enough for Applications like Agitated Reactors

Durable Design:

• ASTM F423 Steam-Cold Water Cycle Test
• 10,000 Volt Elecrostatic Spark Test
• Virtually Eliminates Possibility of Heat-Seal Failure

• Ethylarmor^® High Temperature Corrosion Resistance
• Encapsulated Schedule 80 Carbon Steel Pipe
• Tough Enough for Applications like Agitated Reactors

Durable Design:

• ASTM F423 Steam-Cold Water Cycle Test
• 10,000 Volt Elecrostatic Spark Test
• Virtually Eliminates Possibility of Heat-Seal Failure

• Ethylarmor^® High Temperature Corrosion Resistance
• Encapsulated Schedule 80 Carbon Steel Pipe
• Tough Enough for Applications like Agitated Reactors

Durable Design:

• ASTM F423 Steam-Cold Water Cycle Test
• 10,000 Volt Elecrostatic Spark Test
• Virtually Eliminates Possibility of Heat-Seal Failure

Available In

• Ductile Iron
• Carbon Steel
• 316L Stainless

Linings:

• Soft or Hard Rubber
• Neoprene
• Polypropylene
• PVDF
• ETFE
• PFA

• Super Heavy Duty PFA Liners
• Dovetail Locking Grooves for PFA Retention
• Pressure Rating: Full Vacuum to 250 psi (17.23 bar)
• Operating Temperature: (-)20 °F to (+)400 °F
• Epoxy Coating
• Allows for both Horizontal and Vertical Installation
• Eliminates & Prevents Back-Flow of liquids in Pipelines, Pump Impeller Rotation in Opposite Direction, Siphoning of Pumps
• Size Range: 1" to 6"

• Super Heavy Duty PFA Liners
• Dovetail Locking Grooves for PFA Retention
• Pressure Rating: Full Vacuum to 250 psi (17.23 bar)
• Operating Temperature: (-)20 °F to (+)400 °F
• Epoxy Coating
• Mesh Sizes Available: 120, 30(Standard) and 16
• Size Range: 1" to 6"

• PTFE Expansion Joints
• Isolates Vibration & Shock
• Compensates for Misalignment
• Pure 100% Virgin PTFE Resin
• Uniform Wall Thickness
• Superior Corrosion Resistance in Acidic/Caustic Environments
• Low Spring Rates
• Short Face-to-Face Dimensions
• Available in 2, 3 or 5 Convolutions

• Full 360° Unobstructed View
• Near-Universal Corrosion Resistance
• Unique PTFE/Viton® Envelope Type Gasket
• 150 PSI Rating & Lexan® Impact Shield
• Passes Steam-Cold Water Cycling Tests (ASTM F-423)

Options Available:

• Gas Purge Ring
• General Purpose and Explosion Proof Light
• Vertical Drip Tube

• Delivers Maximum Flow & Chemical Resistance
• Lined With ETFE or PFA
• Solid PTFE Basket
• Available In Sizes 2" - 8"
• Rated at 150 PSI
• Temperature Rated to 400 °F Continuous

Ideally Suited For:

• Mining/Coal Fired Power
• Pulp & Paper or Chemical Processing

• PTFE Expansion Joints
• Isolates Vibration & Shock
• Compensates for Misalignment
• Available in 1/2" - 42"
• Available in 2-12 Convolutions
• Pure 100% Virgin PTFE Resin
• Uniform Wall Thickness
• T-Band™ Protection from Over Compression
• LimitLinks™ Protection From Over Expansion

• Ideal For Fluid Motion, Flow & Color Inspection
• Rugged Ductile Iron Housing
• Thick Borosilicate Glass For Impact Resistance
• PFA Lining

Resistant To:

• All Acids & Solvents, Organic & Inorganic Chlorides & Sulfates
• All Bleach Solutions, Phenols, Caustics & Peroxides
• Temperature Range -20 °F to 400 °F

• A395 DCi Body Bubble-Tight Design
• Heavy Duty PTFE/PFA Liner Resists Cracking
• PTFE or UHMWPE Seat Options

Ideally Suited For:

• Acids, Caustics & Peroxides
• All Bleach Solutions, Solvents & Phenols
• All Organic and Inorganic Chlorides & Sulfates
• Temperatures from -20 °F to 400 °F
• Full Vacuum to 150 PSIG

• One-Piece Heavy-Duty TFM Liner
• PFA/DCI Plug
• PFA Reverse Lip Diaphragm

Ideally Suited For:

• Acids, Caustics & Peroxides
• All Bleach Solutions, Solvents & Phenols
• All Organic and Inorganic Chlorides & Sulfates
• Temperatures from -20 °F to 400 °F
• Full Vacuum to 250 PSIG

• Heavy Duty PFA Liner resists cracking
• Dovetail Locking Grooves for PFA retention
• UV Resistant Epoxy Coating

Ideally Suited For:

• Acids, Caustics & Peroxides
• All Bleach Solutions, Solvents & Phenols
• All Organic and Inorgantic Chlorides & Sulfates
• Temperatures from -20 °F to 400 °F
• Full Vacuum to 250 PSIG

• Ductile Iron Body
• Heavy Duty PFA Lining

Ideally Suited For:

• Strong Acids Up To 98% Sulfuric
• Solvents, Caustics, Chlorides
• Sulfates, Phenols, Peroxides
• Bleach Solutions
• Temperatures from -20 °F to 400 °F
• Full Vacuum to 250 PSIG

• Full 360° Unobstructed View
• Bubble Tight Design
• 150 PSIG Rating
• Energized Seat Design: PTFE/Viton® Energizer Gasket
• Lexan® Impact Shield

Resistant To:

• All Acids & Solvents
• All Organic & Inorganic Chlorides & Sulfates
• All Bleach Solutions, Phenols, Caustics & Peroxides
• Temperature Range -20 °F to 350 °F

• PTFE Expansion Joint
• Isolates Vibration & Shock
• Pressure Rated to 300PSI @400 °F
• Available in 2-12 Convolutions
• Class 150 Carbon Steel Flanges
• Heavy Walled, Isostatically Molded, Seamless PTFE
• Threaded, Carbon Steel Tie-Rods
• Fabricated From Type 321 Stainless Steel, Other Materials Available Upon Request
• Available Universal, Hinged-Pin, Slotted and Gimbal Designs